Posts Tagged ‘johnson’
Outboard Motors Auctions
outboard motors auctions
September 1, 2011-OB Motor Auction (640×480).mp4
HELP 1961 McCulloch Sport Scott outboard?
Ok so i got a boat at an auction that had a 1961 McCulloch Sport Scott outboard that wouldn’t start so i took off the flywheel and noticed one of the points were broken, and with all the tampering the spark plug wire broke off the coil. i guess my question is can i get another point for this motor and can i replace or fix the coils?
Btw its 27.7hp
try discount marine for your replacement parts
http://www.discount-marine-parts.com/ob_mcculloch.html
hope this helps
25hp Outboard Motor
25hp outboard motor
tohatsu 25hp outboard motor engine on a Quicksilver 380HD
Any body know about boat motors?
I have a 2000 Yamaha 25hp outboard. When I was going for a few minutes the oil temp light comes crashing? The idol and will go just as tully full run. The engine is barely used newer and yes I did check the oil. any idea what it coule be would be nice, thanks you.
Check the intake is perhaps the rubble. I had a similar problem with a Merc. When I took the lower unit, I found the rubber hose had slipped off the copper tube.that was problem.Failing that your fan may need replacing.
Outboards Johnson
outboards johnson
1960 Evinrude boat- 70hp Johnson outboard Starting
Using outboard boat during the cold weather.and winterizing?
I do not own an outboard so far I only Mercruiser / O. Had always winterized by a shop. It seems from what I've read and asked of people is pretty easy winterizing outboard motors. I have a 1976 Johnson 85 hp Javelin. If I understand correctly winterizing an outboard motor is simply draining the water by lowering it, draining the lower unit oil to ensure there is no water in it, and cover the cylinders or even just using the stabilizer in the gas and / or running out of gas. If this is correct, then it seems that I should be able to boat use in cold weather and only steps from the above applications. I would like feedback from people who use outboards during the winter. One last question. Is there any advantage in marine antifreeze running through it? I mean with antifreeze to flush the joints between the winter use. It is only used in fresh water
Your pretty much on track …….. The most important thing is to fog the engine as it will not be used for 30 days, then hit the engine down (not angled). A difficult problem is that winter snow can pile up and get into the exhaust through the hub, with thawing and refreezing can crack the case. What we did was duct tape over the end of the plug, and / or embed in a plastic bag or bags. If you suspect that mud or sand has accumulated in the water jacket in the head, it can not hurt to put a little antifreeze in the marine system. Otherwise no need to do that. . Do not leave fuel in the engine or tank …….. E-10 has a short shelf life …… even with stabilization. I use my boat through early January, then pick up again in March.
Johnson Evinrude
johnson evinrude
Evinrude Johnson Outboard Starting System
will be a lower unit of a 83 hp Evinrude 200 91 Johnson 175 fits a model?
Simple answer is no. There are several components in common, but they are different. Good luck!
Outboard Motor Hp
outboard motor hp
Sears Ted Williams 7.5 HP Outboard Motor
What is the highest horsepower outboard motor that can be used on a Cape Dory Typhoon sailboat 19 meters long, safe?
I want to use the boat to go whale to spot if we do not sail and the currents can be up to 4 or 5 knots. The hull speed is six knots.
There is no record on these older USCG sailboat, but I can tell you Carl Alberg that these boats are designed to be extremely seaworthy. I had one of the larger 24 "kittiwakes representing preformed with both a 9.5 and a 6 hp Evinrude. I would say that you check the engine mount and the size and go with what fits best, probably the 6 hp short shaft. Good luck! I already have a question, you can "chase" among whales sail?
Force Outboard Parts
force outboard parts
1986 85HP Force Outboard Running w/Telltale added
L Drive Force Outboard Motor Parts?
I am in urgent need of a retaining ring (F695764), and misc other parts if someone can direct to them. This is a H125LD89A Force L drive. Thanks for any help. Mr
WHO CARES
Evinrude Outboard Parts
evinrude outboard parts
1968 1802 Evinrude mate 1.5 HP Outboard Motor Resurrection With Johnson 3 HP parts
what is the part number for the track rod arm off a 1992 Evinrude 90hp outboard motor?
173,700 is probably not true that for the old style Power Trim & Tilt abdominal or non power trim and tilt models. If your engine "Fastrack" power trim and tilt the right # 175125 is a dual-wire cable to a – # 175125 # 175322 link and a dual cable control adapter kit. that link was originally supplied with the engine. Be careful as the fast Trak system has a new belly with different geometry and will not function without the right parts. Check your Model # on your engine to be sure. If you have any questions contact me and I will be glad to help
Evinrude Parts
evinrude parts

There is a huge market for parts Mercuiser boat. This is no surprise to many boating enthusiasts, as the line of Mercruiser Mercury Marine has been popular between the sailors since its debut at the Chicago Boat Show in 1961 and has been continuously refined and redesigned for decades.
Mercury Marine was founded in late 1930, and in the 1960 merged with its current parent company, Brunswick Corporation. Today, the company is known for its selection marine engines and water jet equipment.
While the Brunswick Corporation also produces engines for ships through its subsidiary, the Brunswick Boat Group, Mercury Marine specializes in smaller boats that rely on outboard, inboard propulsion systems and sterndrive. The Brunswick Boat Group, by contrast, specializes in larger vessels such as yachts and other pleasure boats.
That's why it's no surprise that many of the sailors in the world to see Mercury Marine. company line Mercruiser sterndrive engines and has led the market since its introduction 45 years ago. Even now, the company remains one of the most popular names in the industry due to its decades of providing high quality navigation equipment for enthusiasts worldwide.
There are a number of companies offering boat Mercruiser parts for enthusiasts who strive to keep your PC in perfect condition. One possible avenue to explore in the search for these pieces of the boat is through Internet, through community forums and websites that offer boat parts sold wholesale prices higher.
Resource Box
From exceptional Mercruiser boat parts to high quality equipment for boaters, Wholesale Marine has them for sale at wholesale prices. The site is not just a store – it’s a community of boaters who come together and share their know-how. Learn more about it by viewing http://www.wholesalemarine.com or by calling 877-388-2628.
Outboard Motors Evinrude
outboard motors evinrude

A reliable motor boat is so important for your safety as the ship itself. Without one, you could end up using their hands as a palette. Knowing what to look for when search for the best boat outboard motor used will save you money, expensive repair costs and a lot of drawbacks. In this article you will learn a little about the motor boat and what to look for when buying a second hand.
Propel the craft through the water is the main purpose of a motor boat. Just as a car engine has many moving parts, a motor boat also has many parts. The main parts of a motor boat is the helix itself motor and various components built inside.
Normally a new motor boat will have some sort of guarantee against defects and receive the discounted service or free. A boat engine used usually have no warranty or coverage, and if something goes wrong, then be stuck with a huge bill. Always is better to buy one from a reputable dealer. If you buy one from an auction site make sure you have excellent feedback ratings and offers some kind of guarantee or repayment period.
When buying a used motor boat, there are several important things to do and look. If you are currently attached to a boat, take for a test drive and if you can run wide. Ask the owner of the motor age, and if you have had major repairs. In addition to repair history, ask if they have all repair receipts, so you can watch them. Upon inspecting the boat motor, first check the condition of the engine and look for any wear and tear off. Look for any type of welding or work that was done. The propeller must turn to find any wobbles or anomalies. Also check the support for any dings, dents or gouges.
You must have a compression test done to check the cylinders. Usually you are looking for the compression that is more or less 10% of each. Remove cover and check for any fuel, water or exhaust leaks. If you are not mechanically inclined, it is best to hire a mechanic who can make these checks.
The boat engine is one of the most expensive items you will need for your boat. Although one can never be 100% sure of a motor boat second hand, a proper inspection to increase the chances of success. Buy a good used motor boat will save a lot of inconvenience, expensive repairs and a night stranded in the lake.
Mark Ralph is a prolific author and an expert in several fields. He maintains a Boating site and is the President of a Marketing & Consulting Firm. For Used Boat Motors, click: http://www.used-boatmotors.com or Save Money by Buying Discount Boat Motors.
Outboard Motor Trim
outboard motor trim
1988 80hp Mercury Outboard Motor- Oil Injected – Power Trim
25 HP Mercury outboard motor will not tilt?
2001 Mercury 25 hp outboard tiller when it is rotated in the forward gears will mottor Do not tilt. On this engine there are two hook shaped arms, the trim pin so that the motor will not tilt in neutral or reverse to keep. They should run when the engine is in forward gear in case the engine hits bottom. Does anyone know how this upward adjustment of the rod that attracts poor? Thanks Where is the adjustment nut? How do I, I can push it reverse lock arm up with my finger and tilting the engine, they will not rise far enough on their own when mototr is put into gear.
First, make sure the reverse lock springs are the reverse lock hook control. There is no adjustment on the rear lock bar, make sure it is properly connected to the inverted hook and shift shaft.